- BEARINGS TRAINING INDUSTRY
- Angular Contact Ball Bearings Cylindrical Roller Bearings Flange Block Bearings
English
- Address377 South Layton Road Anderson Indiana 42361, U.S.A.
- Phone(Working Time)409-782-6347
Mounted Units & Inserts
Contact NowTRITAN Mounted Bearings and Inserts. Mounted bearings, sometimes called bearing units or bearing blocks, have a bearing installed in a housing to ease installation and provide additional support for the bearing. They are face or surface mounted in applications where the shaft is perpendicular to the unit.
Mounted units are two part assemblies: The housing and the bearing insert. There are several housing options that are considered [stock" housings; these are very common in the power transmission industry.A solution to increase reliability and machine uptime INSOCOAT electrically insulated rolling bearings Prevention of electrical erosion in bearings Whenever an electric current passes through rolling bearings, there is a potential threat to the relia-bility of your machines.
| Bearing Number | Bore Dia | Outer DIa | Width | Size |
|---|---|---|---|---|
| AMI UCX18-56 Mounted Units & Inserts | 111000 N | 108000 N | 140.000 mm | 1800 rpm |
| AMI UCST212-38TC Mounted Units & Inserts | 16800 N | 66.7000 mm | 11800 N | 38.100 mm |
| AMI UCX18 Mounted Units & Inserts | 43 mm | 64 mm | 0.57 | 0.62 kg |
| AMI UCX17-52 Mounted Units & Inserts | 508 mm | 450 mm | 3.3 | 2.2 |
| AMI UCX17-55 Mounted Units & Inserts | 11.5 kg | 11 mm | 90.475 mm | 166.5 mm |
| AMI UCST212-36TC Mounted Units & Inserts | 0.0081 kg | 6 mm | 19 mm | 0.3 mm |
| AMI UCX17 Mounted Units & Inserts | 85.000 mm | 245000 N | 2.50 mm | 2400 rpm |
| AMI UCST211TC Mounted Units & Inserts | 52.3 kN | 12.5 kN | 46 mm | 12000 r/min |
| AMI UC217-52C4HR5 Mounted Units & Inserts | 1.00 mm | 14000 rpm | 12.000 mm | 19.1 mm |
| AMI UCMFL209-27MZ20 Mounted Units & Inserts | 1660 kN | 2.1 mm | 32 kg | 60 mm |
| AMI UCT203-11 Mounted Units & Inserts | 1 mm | 330 | 300 N/mm² | 5 ° |
| AMI UCMFL207-23MZ20 Mounted Units & Inserts | 105 ° | 3 mm | 20 mm | H7 |