Pillow Block Bearings

Contact Now

Pillow Block Bearings Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations.Pillow block bearings are a typical style of bearing. These bearings are composed of a self-aligning ball bearing (the commonly used type) and plummer block. They can be attached to a shaft by fastening a ball retaining screw.

 

 

Pillow block bearings, sometimes referred to as plummer block bearings, are mounted bearings that are used to provide load support for a rotating shaft. Their mounting surface is on a plane parallel and offset to the axis of the shaft. Mounting holes or slots in the base or feet of pillow block bearings permit adjustment and easy mounting.

 

 

 

5.118 Inch | 130 Millimeter x 7.44 Inch | 188.976 Millimeter x 6.125 Inch | 155.575 Millimeter QM INDUSTRIES QAAPX26A130SEM Pillow Block Bearings

J7 Silicone
Tapered hole adapter 14000

3.688 Inch | 93.675 Millimeter x 5.13 Inch | 130.302 Millimeter x 4.938 Inch | 125.425 Millimeter QM INDUSTRIES QVVPA22V311SO Pillow Block Bearings

23300 Cast Iron
Oil-free type Insert Bearing Unit

3.937 Inch | 100 Millimeter x 5.13 Inch | 130.302 Millimeter x 4.126 Inch | 104.8 Millimeter QM INDUSTRIES QVVP22V100SET Pillow Block Bearings

52100 Bearing Steel Round Type
10 Days or more S (for Oil Seal)
1/11