AMI UEWTPL208W Mounted Units & Inserts

B:36.00 mm; Basic Dynamic Radial Load Rating C:49400 N; d:40.000 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:45500 N; Oil Speed Rating n2:8000 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6200 rpm; D:80.0000 mm;

Mass plain bearing:11.5 kg; b:11 mm; C:90.475 mm; Da min.:166.5 mm; r2 min.:1.1 mm; α:6 °; da min.:129 mm; rb max.:1.1 mm; Sealing solution:Triple-lip seals; Basic dynamic load rating C:1250 kN;

a:43 mm; da min.:64 mm; Calculation factor X:0.57; Mass bearing:0.62 kg; D1 ≈:83.3 mm; Reference speed:8000 r/min; Limiting speed:8000 r/min; Da max.:91 mm; Calculation factor Y0:0.52; Basic static load rating C0:40 kN;

rb max.:1 mm; Material constant KM:330; Specific static load factor K0:300 N/mm²; α:5 °; Design (sliding contact surface combination):Steel/steel; Basic dynamic load rating C:900 kN; M:8 mm; D:158.75 mm; d:101.6 mm; Basic static load rating C0:2650 kN;

D1 ≈:508 mm; d1 ≈:450 mm; Calculation factor Y2:3.3; Calculation factor Y0:2.2; Fatigue load limit Pu:1220 kN; B:437 mm; d:420 mm; Thrust factor K:1.88; Basic dynamic load rating C:5830 kN; Calculation factor e:0.31;

K:5 mm; ra max.:2.5 mm; d:240 mm; Limiting speed:1000 r/min; Fatigue load limit Pu:400 kN; das:267 mm; d1 ≈:276.7 mm; Da max.:347 mm; B:160 mm; b1:9.4 mm;

Basic dynamic load rating C:52.3 kN; Fatigue load limit Pu:12.5 kN; Ew:46 mm; Limiting speed:12000 r/min; U:32 mm; Mass needle roller and cage assembly:0.076 kg; Basic static load rating C0:100 kN; Fw:38 mm; Reference speed:10000 r/min;

α:105 °; a:3 mm; d:20 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.15; D:28 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; B:30 mm;

Mass bearing:0.0081 kg; B:6 mm; D:19 mm; r1,2 min.:0.3 mm; d2 ≈:8.5 mm; Fatigue load limit Pu:0.038 kN; da min.:7 mm; d:5 mm; Da max.:17 mm; D2 ≈:16.5 mm;

Fillet Radius ra:1.00 mm; Grease Speed Rating n1:14000 rpm; d:12.000 mm; B:19.1 mm; Oil Speed Rating n2:18000 rpm; Basic Static Radial Load Rating Co:6800 N; Basic Dynamic Radial Load Rating C:11700 N; Accessories:One Seal; D:37.0000 mm; Sealed Speed Rating n3:14000 rpm;

Basic Dynamic Radial Load Rating C:16800 N; D:66.7000 mm; Basic Static Radial Load Rating Co:11800 N; d:38.100 mm; Accessories:One Seal; Shielded or Sealed B1:14.3 mm; Fillet Radius ra:0.79 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Width Plain B:11.1 mm; Grease Speed Rating Open/Shielded n1:9

d:85.000 mm; Basic Static Radial Load Rating Co:245000 N; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:2400 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:238000 N; Oil Speed Rating n2:3400 rpm; B:82.00 mm; D:180.0000 mm;

N1:19.05 mm; P150°:33.4 kN; PG:1/8 NPT; J min.:219.075 mm; Adapter sleeve assembly:SNW 15x2.3/8; Bearing limiting speed:6300 r/min; da:60.325 mm; Cap bolt, SAE grade:8; Cap bolt:2 x 1/2-13 UNC; Stabilizing ring:SR-15-0;

D2:31.2 mm; Static axial stiffness, preload class C:39 N/µm; Da max.:33 mm; Preload class A GA:30 N; rb max.:0.15 mm; ra max.:0.3 mm; Ball diameter Dw:5.556 mm; Calculation factor f0:7.2; Static axial stiffness, preload class A:18 N/µm; Calculation factor fHC:1;

Basic static load rating C0:1660 kN; r1,2 min.:2.1 mm; Mass bearing (including seat washer where applicable):32 kg; H:60 mm; Basic dynamic load rating C:247 kN; D:600 mm; Da max.:543 mm; Limiting speed:950 r/min; Fatigue load limit Pu:26 kN; da min.:557 mm;